Home>Products>IKO Bearing>IKO CR8R Cam Follower and Track Roller - Stud Type
IKO CR8R Cam Follower and Track Roller - Stud Type
category
IKO Bearing
IKO CR8R Bearing SPECIFICATIONS
What is the best 160mm D place to buy 4350 Reference Speed Rating (r/min): IKO CR8R Cam Follower and Track Roller - Stud Type online? IKO Bearing Manufacturing 68.3mm B Service .
- IKO
CR8R
- 160mm
- 4350
- 68.3mm
- Steel
- 9.7
- Open Type
- 193
- 75mm
-
Shandong Xianghe Equipment Co., Ltd2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
IKO CR8R Cam Follower and Track Roller - Stud TypeCross reference
- 160mm
- 4350
- 68.3mm
- Steel
- 9.7
- Open Type
- 193
- 75mm
- 3800
- 163
IKO CR8R IKO CR8R Cam Follower and Track Roller - Stud TypeProducts and services
IKO CR8R bearing Size Chart (mm/inches) | |
|---|---|
| Series | 26000 |
| Cone Part Number | 26100 |
| Cup Part Number | 26334 |
| Design Units | Imperial |
| Bearing Weight | 0.6 Kg |
| Cage Type | Stamped Steel |
| d | 25.400 mm |
| D | 85.001 mm |
| B - Cone Width | 18.923 mm |
| C - Cup Width | 15.875 mm |
| B | 18.999 mm |
| R - Cone Backface To Clear Radius1 | 1.520 mm |
| r - Cup Backface To Clear Radius2 | 1.52 mm |
| da - Cone Frontface Backing Diameter | 32.51 mm |
| db - Cone Backface Backing Diameter | 34.54 mm |
| Da - Cup Frontface Backing Diameter | 66.50 mm |
| Db - Cup Backface Backing Diameter | 68.07 mm |
| Ab - Cage-Cone Frontface Clearance | 2.3 mm |
| Aa - Cage-Cone Backface Clearance | 0 mm |
| a - Effective Center Location3 | -4.1 mm |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 3420 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 13200 lbf |
| C0 - Static Radial Rating | 13500 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 2110 lbf |
| K - Factor7 | 1.62 |
| e - ISO Factor8 | 0.36 |
| Y - ISO Factor9 | 1.67 |
| G1 - Heat Generation Factor (Roller-Raceway) | 16.1 |
| G2 - Heat Generation Factor (Rib-Roller End) | 10.1 |
| Cg - Geometry Factor | 0.063 |
IKO CR8R INTERCHANGE
IKO Bearing Part series CR8R is a potential replacement for these common bearing part numbers:
CR8R
CR8R
CR8R
CR8R
CR8R
CR8R
CR8R
CR8R
Contact Us
- Shandong Xianghe Equipment Co., Ltd
- Addressjinan,shandong,China
- Phone(Working Time)86-65-7849
- Fax
IKO CR8R Technical Articles
| How do you check the bearing clearance on a feeler gauge? |
| How do you lubricate thrust bearings? |
| How do you visually inspect a wheel bearing? |
IKO Bearing CATEGORIES
- Vickers Piston pump PVH
- Vickers Vane Pump
- Vickers Piston Pump
- Vickers Piston Pump PVQ
- Vickers Piston pump PV
- Vickers Piston Pump PV Series
- Vickers F12 Motor
- Vickers Piston Pump PVB
- Vickers PVXS series Piston Pump
- Vickers Double Vane Pump
- FAG Bearing
- IKO Bearing
- KOYO Bearing
- NSK Bearing
- NTN Bearing
- REXROTH Throttle check valves
- REXROTH Throttle valves
- REXROTH Directional spool valves
- REXROTH Check valves
- REXROTH Valves
- REXROTH Pressure reducing valve
- REXROTH Throttle check valve
- REXROTH Pressure relief valve
- REXROTH HY-CHECK VALVE
- REXROTH Twin throttle check valve
- REXROTH Directional poppet valves
- 6302 2rs Bearing
- sbr12uu Bearing
- 6803 2rs Bearing
- skf 6006 Bearing
Customers Who Viewed IKO CR8R Bearing Also Viewed
IKO CRH26VBUU Cam Follower and Track Roller - Stud Type
1 Inch | 25.4 Millimeter x 1.313 Inch | 33.35 Millimeter x 0.515 Inch | 13.081 Millimeter IKO IRB168-1 Needle Non Thrust Roller Bearings
2.5 Inch | 63.5 Millimeter x 3 Inch | 76.2 Millimeter x 1.5 Inch | 38.1 Millimeter IKO LRB404824 Needle Non Thrust Roller Bearings
IKO RNAST35 Cam Follower and Track Roller - Yoke Type
IKO NUCF20-1R Cam Follower and Track Roller - Stud Type


